Groupe PFL


Go to content

Display units

Products

PRETEC 5304/5314

Technical specifications

Prope connections

4 connect , no limits of combination

Measuring probe

PRETEC 29xxN / TESA GTxx

Factor

each probe individually adjustable

Mode of measuring

static: positive, negative
dynamic: maximum, minimum, difference, average

Measuring speed

measuring/second

Measuring range

73,75 mV/V/mm

Display

TFT graphic display with background lighting

Numerical step value

Instrument 5304: 1µm, 0.1µm
Instrument 5314: 1µm, 0.1µm, 0.01µm

Layout

maximum 4 columns of maximum 12 numerical values

Memory of measurements

values (with time and date)

Inputs, outputs

RS 232, CAN bus system, digital signals

Power supply

net adapter 24 VDC

Protection

IP 54 for front plate

The new-generation PRETEC 5000 convinces through out-standing technical data,
high stability and precision. In addition, it shows a high measuring velocity together
with simple operation. Up-to-date processor technologies and cleverly thought out
software make this possible.

This measuring instrument suitable for workshops with its 4 measuring channels
as well as the automatically scalable displays convinces through its design and
its small space requirement.

Thanks to the updated TFT graphic display with background lighting, the reading
from a large viewing angle and under bad light conditions is possible without
putting any strain to the eyes.

The extension box
PRETEC 5408 EWB makes it possible to connect up to
12 measuring probes to one instrument. This allows to solve, together with the
basis unit, measuring tasks which until today could only be solved by the
means of a measuring processor.
The measuring release is made over the keyboard or with a control signal.





PRETEC 5808 HE

Technical specificationen

Applications

together with PC and installed BRIDGE

Requirements system

P III, 450 MHz, 64 MB RAM, 50 MB HD,95/98, Grafik 1024 x 768

Probe connections

8 prope per 5808 HE and boxes
5808 HE cascadable

Mode of measuring

static: positive, negative
dynamic: maximum, minimum, difference, average

Measuring speed

measurements/channel/second

Measuring range

(24-Bit-AD-converter)

Sensibility

73 / 75 mV/ V/ mm

Display

LCD-Display for status display

Resolution

1,0 µm, 0.1µm, 0.01µm

Inputs / outputs

RS 232, CAN Bus system, digital Signal

Power supply

net adaptor 24 VDC, for max. 3 5808 HE

Protection

IP 54 for fronte plate

Remarks

display, mode of measurement and storage determined through software BRIDGE

Technical changes or improvements reserved

PRETEC 5808 HE

The new-generation
PRETEC 5000 convinces through out-standing technical data,
high stability and precision. In addition, it shows a high measuring velocity together
with simple operation. Up-to-date processor technologies and cleverly thought out
software make this possible.
The new measuring boxes
PRETEC 5808 HE can be used together with the BRIDGE Software
of PRETEC. Thanks to same, all advantages of a highly updated operation can be used.

The flat body requires small space only thanks to its tight dimensions and will therefore
comply with the often limited space in the industry.
small display on the front plate indicates the status of the
PRETEC 5808 HE when being
connected.
CAN bus represents an up-to-date digital connection system that connects the
PRETEC 5808 HE with the PC. With this in the field well-proved interface, outside influences
can be exclueded.




Technical specificationen

Measuring range:

 

Instrument analogue

± 10, 30, 100, 300, 1000 µm

(mit Taster 2970 auch 3000 µm)

Instrument digital

± 100, 1000µm

Measuring functions

+A, -A, A+B, A-B, -A+B, -A-B

Dyna. measurements

max, min, max-min

Accuracy

digital readout 0.5%
tolerance signals 0.5%
analogue readout 1%

Technical changes or improvements reserved

PRETEC 4000

Compatible with all
PRETEC probes and many from competing manufacturers (half-bridge)
construction for use on shop floor Analog / digital (4101/4701) or digital (4151/4751)
readout(4101/4151) or inch-metric (4701/ 4751) Dual input for inductive gauge heads,
air-electronic converters or laser heads In-/Outputs for automatic measuring cycle
and tool correction RS-232C output to transfer data to a computer, printer or CNC
controller. Battery assisted memory to store data for future transfer. Extremely short
measuring cycles (20/170 measurements per second static/dynamic) data-
processing.
Menu selection from keyboard, simply to operate Zero setting with setting
master at all points within the measuring range either from the keyboard
or through external signal (manual or automatic) Monitoring of tolerance /
warning limits (5 signals)


Measuring software BRIDGE

This measuring software developped by PRETEC can easily be operated and is easy to survey.
There is hardly a difference in comparison with Microsoft®products; therefore, the
lead-in to the work is made easier.

The configuration of measuring probes, the input of individual factors as well as comlpex
mathematical formulas are easily programmable in an independent manner by the operator.
Control functions are also available and can be integrated independently by the operator after
a short introduction.
Different operator levels allow the simple regulations of competences.

The storage of data and simple statistics can be found in the basic program. The exchange
to a superior PLC software has been foreseen and can be realized by our specialists
at a reasonable rate.





Home | Companies | Products | Engineering and projects | Contact us | Site Map

Rechercher

Back to content | Back to main menu